我下了内置分辨的补丁。。但是怎么修改呢？dsfix.ini这个修改里面的哪个啊。。都是英文看不懂啊。。求教

yst8491182

复制到google翻译一下

bioslzk

# internal rendering resolution of the game
# higher values will decrease performance
renderWidth 1920
renderHeight 1080

# Depth of Field resolution override, possible values:
# 0 = no change from default (DoF pyramid starts at 512x360)
# 540 = DoF pyramid starts at 960x540
# 1080 = DoF pyramid starts at 1920x1080 (for high end systems)
# 2160 = DoF pyramid starts at 3840x2160 (if you have an utterly insane ultra high end PC)
# higher values will decrease performance
dofOverrideResolution 1080--------------------------------------------------

# Depth of Field scaling override (NOT RECOMMENDED)
# 0 = DoF scaling enabled (default, recommended)
# 1 = DoF scaling disabled (sharper, worse performance, not as originally intended)
disableDofScaling 0

# texture filtering override
# 0 = no change
# 1 = enable supersampling by downscaling
# 2 = full AF override (may degrade performance, for high end systems only)
# if in doubt, leave this at 1
filteringOverride 0

# borderless fullscreen mode
# make sure to select windowed mode in the game settings for this to work!
# 0 = disable
# 1 = enable
# toggle this with F8
borderlessFullscreen 0

# disable cursor at startup
# 0 = no change
# 1 = off at start
# you can still toggle the cursor with F9
disableCursor 1--------------------------------------------

# capture cursor (do not allow it to leave the window)
# 0 = don't capture
# 1 = capture
# (this also works if the cursor is not visible)
# toggle this with F10
captureCursor 0

# override the in-game language
# none = no override
# en-GB = English
# de-AT = German
# all other language codes supported by the game should also work, untested
overrideLanguage none

# D3D adapter override
# -1 = no override
# N = use adapter N
# this setting is for multiple (non-SLI/crossfire) GPUs
# everyone else should leave it at -1
d3dAdapterOverride N---------------------------------------------

# Log level - 0 to 11, higher numbers mean more logging
# only enable for debugging
logLevel 0

###############################################################
# The settings below are not yet ready to use!!               #
###############################################################

# You can only set either forceFullscreen or forceWindowed (or neither)
# 0 = off, 1 = on
forceWindowed 0
forceFullscreen 0

# The following settings are only functional if either forceFullscreen or forceWindowed is enabled
# The display width/height
presentWidth 1920---------------------------------
presentHeight 1080---------------------------
# turn on/off Vsync
enableVsync 0
# adjust display refresh rate in fullscreen mode - this is NOT linked to FPS!
fullscreenHz 60

保持单调

# internal rendering resolution of the game
# higher values will decrease performance
renderWidth 1920
renderHeight 1080


这个吧 修改成你的屏幕 最大分辨率

xiang33

配置不高打了会卡= =