MSI Afterburner 4.6.1 Final 15561
Version 4.6.1[*]Added new MSI Touch of Modern skin by Drerex design
[*]Added asynchronous dual fan control support for reference design NVIDIA GeForce RTX 20x0 series graphics cards. Please take a note that only 100% NVIDIA reference design dual fan control implementations are supported, third party proprietary asynchronous fan control solutions (e.g. EVGA iCX series asynchronous fans) are not supported and will not be supported in future versions. The following asynchronous fan control functionality is available:
[*]Added new “Synchronize fan speeds” button, which is allowing you to switch between synchronous and asynchronours fan control modes. Please take a note that new fan speed controls are available in v4 skins only, v3 and v2 skins are deprecated and no longer receive new functionality
[*]When fan speeds synchronization is enabled, MSI Afterburner’s fan control functionality behaves exactly like in the previous version, i.e. both fans are running asynchronically in default hardware automatic fan speed control mode but become linked synchronically if you enable manual or software automatic fan speed control mode
[*]When fan speeds synchronization is disabled, you may select and adjust each fan speed independently. For software automatic fan speed control mode independent temperature curves are also adjustable for each fan
[*]Improved hardware monitoring module:
[*]Inverted hotkeys handling approach for multiple selected hardware monitoring graphs. Previously single graph settings mode was active by default, but you could apply some settings (e.g. “Show in On-Screen Display”) to multiple selected graphs with <Ctrl> hotkey modifier. Now such settings are applied to multiple selected graphs by default and <Ctrl> hotkey modifier is used to apply settings to single focused graph
[*]Group operation notifier has been moved to hardware monitoring graph properties header
[*]Improved backward compatibility with monitoring profiles created in the previous versions of application. It is no longer necessary to recreate the profiles having monitoring settings without On-Screen Display layout
[*]It is no longer necessary to click <Apply> button inside the On-Screen Display layout editor after changing current layout, now the changes are applied properly on closing the editor
[*]The progress of saving multiple graphs’ settings is now displayed in the caption of the application’s property sheet
[*]Optimized handling of “dirty” flag for settings decreases saving time for multiple graph’s settings when using multiple subsequent group operations
[*]Added new “Hide attached monitoring panel” command to the context menu of hardware monitoring window. You may use it to toggle visibility of monitoring window when it is attached to the main application window
[*]Now you may press <Ctrl> + <M> hotkeys to toggle monitoring window attachment
[*]Improved voltage/frequency curve editor for both AMD and NVIDIA GPUs:
[*]Now you may hold <Shift>and press left mouse button on initial desired horizontal position in the editor window to begin fragment selection, then drag mouse cursor to desired final horizontal position and release left mouse button to select a fragment. The following functionality is available for selected fragments:
[*]You may double click the editor window to reset fragment selection
[*]You may adjust the offset for any point inside the selection with mousecursor to apply the same offset simultaneously to all selected points
[*]You may adjust the offset for any point inside the selection with keyboard cursor keys, <Enter> or <Shift>+<Enter> keys to apply the same offset or specify the same target frequency or voltage for all selected points
[*]Improved skin engine:
[*]Skin engine no longer crashes when switching between the skins having the same site with and without alpha channel
[*]Added thumbless skinned slider controls support
[*]Added alpha path threshold support for skinned slider controls
[*]Improved skin cross-compatibility layer:
[*]Extended list of applications supported by skin cross-compatibility layer
[*]Various compatibility fixes for third party skins supported by cross-compatibility layer
[*]Fixed issue with GUI stopping responding during adjusting skin scaling ratio on the fly in high DPI mode when skin composition mode was set to layered mode with alpha
[*]Updated third party hardware database:
[*]Added new third party voltage control capable graphics cards to the database
[*]Added new third party graphics cards with multichannel GPU, memory and VRM temperature sensors to the database
[*]RivaTuner Statistics Server has been upgraded to v7.2.2
4.6.1版本
通过Drerex设计，增加了现代皮肤的MSI触感增加了异步双风扇控制支持，以参考设计NVIDIA GeForce RTX 20x0系列显卡。请注意，只有100%的英伟达参考设计双风扇控制实现是受支持的，第三方专有的异步风扇控制解决方案(如EVGA iCX系列异步风扇)不受支持，并将在未来的版本不受支持。异步风扇控制功能如下:新增“同步风扇速度”按钮，允许您在同步和异步风扇控制模式之间切换。请注意，新的风扇速度控制只能在v4皮肤，v3和v2皮肤是不赞成的，不再接受新的功能当启用风扇速度同步时，MSI加力燃烧器的风扇控制功能与前一个版本完全相同，即两个风扇都在默认的硬件自动风扇速度控制模式下异步运行，但如果启用手动或软件自动风扇速度控制模式，则同步连接当风扇速度同步被禁用时，您可以独立地选择和调整每个风扇的速度。对于软件自动风扇速度控制模式，独立的温度曲线也可为每个风扇进行调节改进的硬件监控模块:多个选定硬件监控图的反向热键处理方法。以前，单个图形设置模式在默认情况下是活动的，但是您可以使用热键修饰符将一些设置(例如“在屏幕上显示”)应用于多个选定的图形。现在，默认情况下，这些设置应用于多个选定的图，并且热键修饰符用于将设置应用于单个聚焦图组操作通知符已移动到硬件监视图属性头改进了与应用程序以前版本中创建的监视概要文件的向后兼容性。不再需要在没有屏幕显示布局的情况下重新创建具有监视设置的概要文件改变当前布局后，不再需要点击屏幕显示布局编辑器内的按钮，现在在关闭编辑器时可以正确应用更改保存多个图的设置的过程现在显示在应用程序属性表的标题中在使用多个后续组操作时，对设置的“脏”标志的优化处理减少了多个图形设置的节省时间在硬件监控窗口的上下文菜单中新增“隐藏附加监控面板”命令。当监视窗口附加到主应用程序窗口时，可以使用它来切换监视窗口的可见性现在您可以按下 + 热键切换监视窗口附件改进的电压/频率曲线编辑器为AMD和NVIDIA gpu:现在，您可以按住并在编辑器窗口中初始所需的水平位置上按下鼠标左键开始片段选择，然后将鼠标拖动到所需的最终水平位置并释放鼠标左键来选择片段。以下功能可用于选定的片段:您可以双击编辑器窗口来重置片段选择您可以使用鼠标光标调整选区内任意点的偏移量，以便同时对所有选定的点应用相同的偏移量您可以使用键盘光标键来调整选择范围内的任意点的偏移量，或+键来应用相同的偏移量，或为所有选定的点指定相同的目标频率或电压改善皮肤引擎:当在具有和不具有alpha通道的相同站点的皮肤之间切换时，皮肤引擎不再崩溃增加了拇指祝福蒙皮滑块控件的支持增加了alpha路径阈值支持蒙皮滑块控件改进的皮肤交叉兼容层:由皮肤交叉兼容层支持的应用程序扩展列表跨兼容性层支持的第三方皮肤的各种兼容性修复程序修正了当皮肤合成模式设置为alpha分层模式时，在高DPI模式下实时调整皮肤缩放比例时GUI停止响应的问题更新第三方硬件数据库:添加新的第三方电压控制能力的图形卡到数据库添加新的第三方图形卡与多通道GPU，内存和VRM温度传感器到数据库RivaTuner统计服务器已升级到v7.2.2
链接
提取码: p36u
这么快测试完了 新版本有问题！！！我退回4.6.0版本就没有任何问题了
页:
[1]